Curriculum

26 Sections
144 Lessons
Lifetime

Expand all sectionsCollapse all sections

FREE VIDEO VIEW - Puas Hati Baru Enroll Ke Dalam Course Ni : )
6
- 1.1
  Fungsi Selection
  17 Minutes
- 1.2
  Fungsi Trim & Extend
  14 Minutes
- 1.3
  Pelajari Sistem Koordinat di Dalam AutoCAD
  10 Minutes
- 1.4
  Melukis Polygon
  8 Minutes
- 1.5
  Fungsi Array – Rectangular Array
  10 Minutes
- 1.6
  Latihan 1 – Membuat Logo Volkswagen
  16 Minutes
Part 1 - Pengenalan
5
- 2.1
  Pengenalan Kepada Instructor & Framework Online Course
  14 Minutes
- 2.3
  Versi Perisian AutoCAD & System Requirement
  7 Minutes
- 2.4
  Berapa Kos Menggunakan Perisian AutoCAD?
  6 Minutes
- 2.5
  AutoCAD LT – Option Yang Lebih Murah Untuk Perisian
  4 Minutes
- 2.6
  Bagaimana Untuk Install Perisian AutoCAD di PC/Laptop.
  4 Minutes
Section A Part 1 - Pelajari User Interface AutoCAD.
3
- 3.1
  Pelajari User Interface AutoCAD
  28 Minutes
- 3.2
  Pelajari Bagaimana Mengendalikan Drawing (Drawing Navigation)
  9 Minutes
- 3.3
  Bagaimana Menukar Warna Background Bagi Drawing Area
  3 Minutes
Section A Part 2 - Pelajari Panel Draw
26
- 4.1
  Pelajari Konsep Limit, Menentukan Unit & Setup Template
  22 Minutes
- 4.2
  Pelajari Sistem Koordinat di Dalam AutoCAD
  10 Minutes
- 4.3
  Shortcut Command
  8 Minutes
- 4.4
  Melukis Lines (Garisan)
  16 Minutes
- 4.5
  Melukis Lines (Garisan) Menggunakan Bipolar Coordinate
  7 Minutes
- 4.6
  Melukis Polyline & Spline
  25 Minutes
- 4.7
  Melukis Circle (Bulatan)
  21 Minutes
- 4.8
  Melukis Arcs (Lengkungan)
  20 Minutes
- 4.9
  Melukis Rectangle (Segi Empat)
  16 Minutes
- 4.10
  Melukis Polygon
  8 Minutes
- 4.11
  Melukis Ellipse (Bujur)
  9 Minutes
- 4.12
  Melukis Hatch 1 – Asas Hatch
  14 Minutes
- 4.13
  Melukis Hatch 2 – Set Origin
  3 Minutes
- 4.14
  Melukis Hatch 3 – Associative vs Non Associative
  3 Minutes
- 4.15
  Melukis Hatch 4 – Seperate Hatch Creation
  4 Minutes
- 4.16
  Melukis Hatch 5 – Custom Island Detection
  6 Minutes
- 4.17
  Melukis Hatch 6 – Setting Gap Tolerance
  4 Minutes
- 4.18
  Melukis Hatch 7 – Draw Order & Wipeout
  4 Minutes
- 4.19
  Melukis Gradient
  4 Minutes
- 4.20
  Fungsi Boundary Untuk Mengukur Luas Kawasan
  4 Minutes
- 4.21
  Pelajari Mode Construction Line & Ray
  8 Minutes
- 4.22
  Pelajari Mode Multiple Points
  3 Minutes
- 4.23
  Pelajari Mode Divide & Measure
  7 Minutes
- 4.26
  Pelajari Mode Helix
  2 Minutes
- 4.27
  Pelajari Mode Donut
  2 Minutes
- 4.29
  Pelajari Mode Revision Cloud
  8 Minutes
Section A Part 3 - Pelajari Panel Modify
15
- 5.1
  Fungsi Selection
  17 Minutes
- 5.2
  Fungsi Copy & Move
  12 Minutes
- 5.3
  Fungsi Rotate
  18 Minutes
- 5.4
  Fungsi Trim & Extend
  14 Minutes
- 5.5
  Fungsi Erase & Explode
  4 Minutes
- 5.6
  Fungsi Mirror
  7 Minutes
- 5.7
  Fungsi Fillet
  9 Minutes
- 5.8
  Fungsi Chamfer
  10 Minutes
- 5.9
  Fungsi Blend Curve
  4 Minutes
- 5.10
  Fungsi Stretch
  6 Minutes
- 5.11
  Fungsi Scale
  9 Minutes
- 5.12
  Fungsi Array – Rectangular Array
  10 Minutes
- 5.13
  Fungsi Array – Path Array
  9 Minutes
- 5.14
  Fungsi Array – Polar Array
  7 Minutes
- 5.15
  Fungsi Offset
  10 Minutes
Section A Part 4 - Pelajari Panel Annotation & Dimension
17
- 6.1
  Basic Text – Multiline Text
  7 Minutes
- 6.2
  Basic Text – Single Line Text
  9 Minutes
- 6.3
  Creating New Text Style
  8 Minutes
- 6.4
  Basic Dimension 1 – Using Dimension Tools
  11 Minutes
- 6.5
  Basic Dimension 2 – Using Various Measuring Tools
  11 Minutes
- 6.6
  Komponen Bagi Dimension & Cara Untuk Modify
  13 Minutes
- 6.7
  Creating New Dimension Style
  26 Minutes
- 6.8
  Override & Modify Dimension Style
  9 Minutes
- 6.9
  Alternate Unit & Tolerance
  23 Minutes
- 6.10
  Continuous & Baseline Tools
  5 Minutes
- 6.11
  Center Mark & Center Line
  3 Minutes
- 6.12
  Leader & Multileader
  13 Minutes
- 6.13
  Mencipta New Multileader Style
  13 Minutes
- 6.14
  Mencipta Table Ke Drawing Area
  10 Minutes
- 6.15
  Mencipta Table Style Baru
  10 Minutes
- 6.16
  Menggunakan Formula Ringkas Pada Table
  8 Minutes
- 6.17
  Bagaimana Untuk Link Microsoft Excel Dengan AutoCAD Table
  5 Minutes
Section A Part 5 - Pelajari Panel Layers
3
- 7.1
  Konsep Layer Dalam AutoCAD
  4 Minutes
- 7.2
  Mencipta Layer Baharu
  7 Minutes
- 7.3
  Layer Properties Manager
  16 Minutes
Section A Part 6 - Pelajari Panel Block
3
- 8.1
  Asas Kepada Penggunaan Block Dalam AutoCAD
  7 Minutes
- 8.2
  Mencipta Block Ringkas
  12 Minutes
- 8.5
  Modifying Block di Block Editor
  4 Minutes
Section A Part 7 - Pelajari Panel Properties
2
- 9.1
  Menentukan Warna, Transparency, Linetype & Lineweight Menggunakan Properties Panel
  10 Minutes
- 9.2
  Customizing Properties Menggunakan Properties Pallet
  4 Minutes
Section A Part 8 - Pelajari Panel Group
1
- 10.1
  Pelajari Bagaimana Menggunakan Group
  7 Minutes
Section A Part 9 - Pelajari Utility Panel
3
- 11.1
  Pelajari Quick Measure Tools
  7 Minutes
- 11.2
  Pelajari Tools Distance, Radius & Angle
  5 Minutes
- 11.3
  Menentukan Area
  9 Minutes
Section A Part 10 - Pelajari Panel Clipboard
5
- 12.1
  Copy, Cut, Paste & Paste As Block
  6 Minutes
- 12.2
  Paste To Original Coordinate – Cara Untuk Super Impose 1
  3 Minutes
- 12.3
  Copy With Base Point – Cara Untuk Super Impose 2
  4 Minutes
- 12.4
  Paste Special
  4 Minutes
- 12.5
  Paste As Hyperlink
  4 Minutes
Section A Part 11 - Pelajari Status Bar Toggle
11
- 13.1
  Status Bar In General
  3 Minutes
- 13.2
  Grid Mode & Snap Mode
  6 Minutes
- 13.3
  Dynamic Input
  3 Minutes
- 13.4
  Orthomode
  1 Minute
- 13.5
  Polar Tracking
  5 Minutes
- 13.6
  Isodraft
  2 Minutes
- 13.7
  Object Snap Tracking (Autosnap)
  7 Minutes
- 13.8
  Object Snap (Osnap) 1 : Endpoint to Extension
  10 Minutes
- 13.9
  Object Snap (Osnap) 2 : Insertion To Parallel
  9 Minutes
- 13.10
  Lineweight
  3 Minutes
- 13.11
  Regenerate / Refresh in AutoCAD
  2 Minutes
Section B : AutoCAD Advance - Fungsi External Reference
6
- 14.1
  Pengenalan Kepada XRef
  6 Minutes
- 14.2
  XRef vs Block
  2 Minutes
- 14.3
  Bagaimana Menggunakan XRef
  9 Minutes
- 14.4
  Bagaimana Untuk Edit XRef Drawing
  5 Minutes
- 14.5
  Fungsi Clip Untuk XRef
  5 Minutes
- 14.6
  XRef Palette
  7 Minutes
Section B : AutoCAD Advance - Parametric Features
Video Akan Diupload Dalam Masa Terdekat
0
Section B : AutoCAD Advance - Sheet Set
Video Akan Diupload Dalam Masa Terdekat
0
Section B : AutoCAD Advance - Bagaimana Menggunakan Atribute
Video Akan Diupload Dalam Masa Terdekat
0
Section C:1 - Latihan Melukis AutoCAD 2D (Komersil Product)
5
- 18.1
  Latihan 1 – Melukis Logo Volkswagen
  16 Minutes
- 18.2
  Latihan 2 – Melukis Logo Batman
  26 Minutes
- 18.3
  Latihan 3 – Melukis Hook / Cangkuk
  15 Minutes
- 18.4
  Latihan 4 – Melukis Fidget Spinner
  13 Minutes
- 18.5
  Latihan 5 – Melukis Gear
  22 Minutes
Section C:2 - Latihan Melukis AutoCAD 2D (Layout Plan)
4
- 19.1
  Layout Plan – Setting Unit, Limits & Layers
  5 Minutes
- 19.2
  Layout Plan – Melukis Infra
  30 Minutes
- 19.3
  Layout Plan – Memasukkan Block
  33 Minutes
- 19.4
  Layout Plan – Memasukkan Hatch & Text
  9 Minutes
Section C:3 - Latihan Melukis AutoCAD 2D (Isometric Drawing)
6
- 20.1
  Iso Drawing 1 – Fundamental of Isometric Drawing
  6 Minutes
- 20.2
  Iso Drawing 2 (Easy) – Simple Cubic
  16 Minutes
- 20.3
  Iso Drawing 3 (Easy) – Component 1
  13 Minutes
- 20.4
  Iso Drawing 4 (Easy) – Component 2
  27 Minutes
- 20.5
  Isometric Drawing 5 (Medium) – Component 3
  33 Minutes
- 20.6
  Isometric Drawing 6 (Hard) – Component 4
  77 Minutes
Section C:4 - Latihan Melukis AutoCAD 2D (Orthographic Drawing)
7
- 21.1
  Orthographic Drawing 1 (Easy)
  19 Minutes
- 21.2
  Orthographic Drawing 2 (Easy)
  16 Minutes
- 21.3
  Orthographic Drawing 3 (Medium)
  18 Minutes
- 21.4
  Orthographic Drawing 4 (Medium)
  14 Minutes
- 21.5
  Orthographic Drawing 5 (Hard) 1 – Top View
  20 Minutes
- 21.6
  Orthographic Drawing 5 (Hard) 2 – Front View
  8 Minutes
- 21.7
  Orthographic Drawing 5 (Hard) 3 – Side View
  13 Minutes
Section C:5 - Latihan Melukis AutoCAD 2D (Plot Survey)
2
- 22.0
  Plot Survey – Surveyor Unit
  13 Minutes
- 22.1
  Plot Survey – Bearing Unit
  12 Minutes
Section D - Bagaimana Untuk Plotting / Publish Hasil Akhir AutoCAD
9
- 23.1
  Asas Kepada Fungsi Plotting
  9 Minutes
- 23.2
  Pengenalan Kepada Pelbagai Spesifikasi & Saiz Kertas
  5 Minutes
- 23.3
  Setting & Configuration Di Page Setup
  9 Minutes
- 23.4
  Mencipta Layout Title Block
  12 Minutes
- 23.5
  Mencipta Viewport
  15 Minutes
- 23.6
  Menentukan Scale Yang Betul
  11 Minutes
- 23.7
  Plotting Drawing Dari Layout Area – Single Plotting
  4 Minutes
- 23.8
  Plotting Drawing Dari Layout Area – Batch Plotting
  6 Minutes
- 23.9
  Plotting Drawing Dari Drawing Area
  10 Minutes
Bagaimana Anda Boleh Menjana Side Income Bersama Kami Sebagai Affiliate
1
- 24.1
  Jom Buat Side Income Bersama Kami Sebagai Affiliate $$
Bonus - EBook Percuma Dan Lain-Lain
3
- 25.1
  Download Senarai Shortcut & Command AutoCAD
- 25.2
  Download Free Ebook (AutoCAD Manual And Guide)
- 25.3
  Download Free Ebook (Exercises & Training)
Request Sijil Anda
1
- 26.1
  Request Sijil AutoCAD Ultimate Guide

Fungsi Selection

Download DWG File > https://drive.google.com/file/d/1CH45WE_Q7LW3uW2_g1enVmU_a2a7il6Y/view?usp=sharing

——————-

URL Telegram Support Group > https://t.me/joinchat/Jo0b-R2g94zrO3uqUMekNQ

Berminat nak belajar pelbagai lagi online course menarik dari kami? Click sini > https://aden.academy/courses/

Fungsi Trim & Extend

Get Newsletter

Your download should start automatically, if not Click here. Should I give up, huh?

Email address

Leave this field empty if you're human:

Sertai Program Affiliate

Pelajari pelbagai ilmu 3D modelling & jana pendapatan sampingan!

INFO LANJUT

Jika Terdapat Sebarang Pertanyaan, Sila Hubungi:
019-950 0038
info@aden.academy
FB/ADENAcademyOfficial

Hak Cipta Terpelihara. ADEN ACADEMY - 2020.

Curriculum

Fungsi Selection

Download DWG File > https://drive.google.com/file/d/1CH45WE_Q7LW3uW2_g1enVmU_a2a7il6Y/view?usp=sharing

——————-

URL Telegram Support Group > https://t.me/joinchat/Jo0b-R2g94zrO3uqUMekNQ

Berminat nak belajar pelbagai lagi online course menarik dari kami? Click sini > https://aden.academy/courses/

MAKLUMAN!

Login with your site account

Register a new account

Modal title